Ultrasonic / Sound Camera
检测原理
BATCAM 2.0是世界上最轻巧的超声波/噪音成像仪，开发此产品的目的是通过测定超声波频带的信号，来检测气体泄漏和电弧。使用112个声学感测器提升检测敏感度，开发了最大可检测出48kHz的超声波频带信号的功能。并且在测试包括BSR (Buzz, Squeak, Rattle) 噪音方面，也有着卓越的表现。
Power
Handled Ground Penetrating Radars
Proceq GP8100 Ground Penetrating Radars
Highly productive portable concrete GPR array, enabling quick object detection and superior data collection.
Productivity
Boost scanning efficiency with 25cm effective scan width and 80cm penetration depth, one scan is equivalent to 6 classical line scans.
Visualization
Detecting objects of all sizes and marking on concrete surfaces has never been so easy and fast with the superline scan view.
Density
The high scan rate of 1'200 scans/s enables a very dense GPR data collection in only one superline scan, which can be visualized in 6 classical line scans.
Ground Penetrating Radars
Proceq GS8000 Ground Penetrating Radars
Highly productive portable concrete GPR array, enabling quick object detection and superior data collection.
Resolution & depth
Superior clarity of data at different depths thanks to the unique Swiss Made ultra-wideband radar technology, optimized for small, closely-spaced and deep targets alike.
Versatility
Scan on flat or rough terrains, get real-time accurate GNSS positioning and adjust display settings in real-time for an optimal on-site interpretation of underground findings
User Experience
End-to-end workflows designed for experts and non-experts alike, from the most intuitive data acquisition to instantly shareable deliverables. Access your data from anywhere, anytime.
HV Power Product (LFG-50 & PT-14)
LFG-50 & PT-14
50w 大功率电缆路径仪
HV Power Product (SWG12/1100R & SWG32/2000R)
SWG12/1100R & SWG32/2000R
手推车式电缆故障智能定位仪
HV Power Product (OLT-80A)
OLT-80A
绝缘油耐压测试仪
HV Power Product (RIF-9)
RIF-9
三相智能脉冲反射仪
HV Power Product (P-1000)
P-1000
智能精确定点仪
HV Power Product (ETL-40V/80V)
ETL-40V/80V
车载式
三档电缆故障智能定位系统
SPI-III True Phase Identification System
Our vision has always been to create a phase identification system that exceeds any of today’s industry quality, safety and efficiency requirements. SPI-III’s unique design consists of a wireless bi-module combo that is stunningly easy to configure and operate. With many advancements and innovations, SPI-III will be more helpful than ever before, enabling field applications such as identification of A-B-C electrical phases from all 50 and 60 Hz networks, switchgear phase concordance (matching), phase rotation, system paralleling, underground phasing applications and more.
Cable Identification (VCI-3)
VCI-3™ Voice Cable Identification System
The VCI-3™ is a cable identification and phasing system used during installation or maintenance works on de-energized three phase systems.
Operation Mode
The tone transmitter integrates a speaker and a mi-crophone to record the vocal identification message. The transmitter uses direct connection injection clips or three clamps for magnetic current injection. The clamps induces current in the conductor and no concerns with the cable sheath. Thanks to its rechar-geable battery pack, it can provide more than eight hours of continuous work.
The compact detector uses a magnetic sensor. It has a built-in speaker with adjustable volume and a earphones jack to listen to the vocal identification message even in noisy environments. The sensor detection threshold is adjustable according to cable type and length. Detection is guaranteed by a digi-tal processing system that checks for the presence or absence of every tone that comes in from the transmitter end. ndb Technologies’ unique process guarantees a safe, precise and flawless detection.
Cable Identification (LCI)
LCI™ Live Cable Identification System
The LCI™ is intended for energised cable identification on secondary and primary circuits. It features a dual frequency technique that eliminates false identifications. The LCI™ is designed to be easy to use, safe for the user and cost-effective.
Low Voltage Cable Identification
The LCI-L™ load module is connected to the secon-dary side of the distribution transformer (120 VAC to 420 VAC).
The LCI-D™ detector module is used on insulated distribution low voltage cables (120 VAC to 420 VAC) on the secondary side of the transformer. It detects the signal coming from the LCI-L™ thus identifying the cable confirming its tags.
Advantages
Dual frequency efficient technique
Easy to install and operate
The safest technique on the market
Transmission on live cables
Detection by digital processing
High-resolution detection frequencies
Single or three phase applications
High Voltage Cable Identification
The LCI-L™ load module is connected to the secon-dary side of the distribution transformer (120 VAC to 420 VAC).
For high voltage cable identification, the LCI-D™ detector module must be paired with the LCI-HV ™ high voltage probe. The LCI-HV™ probe is designed to identify online cables up to 25kV thus enabling cable identification on the primary side of the trans-former.
The LCI™ system can be used on single phase circuits as well as three phase circuits.
High Precision Digital Micro-ohmmeter
DRM-10A High Precision Digital Micro-ohmmeter
The DRM-10A™ is a lightweight and portable micro-ohmmeter designed to measure very low resistances from 0.01 µΩ to 200 Ω. It is the most accurate in its category.
The DRM-10A™ is suitable for both laboratory and field applications. Resistance measurements are calculated automatically. This equipment has become the number one choice for industries, pro-ducts engineers, and manufacturers. Recognized as the most accurate and easy to use on the market, the DRM-10A™ is shock resistant and suitable for many applications.
Pipe & Cable Locator
The UtiliGuard Locating System
The UtiliGuard Locating System has accuracy-enhancing features you can’t get on other locators. Ambient Interference Measurement (AIM®) technology automatically recommends the best frequency. An available 12-watt transmitter drives signals farther down large, direct-buried utilities.
And only the UtiliGuard locating system can provide the depth and horizontal distance to the utility. Don’t take a risk on anything else. Get the UtiliGuard locating system.
Ground Fault Locator
OHLF-6020_接地故障定仪位
用途：6-35kV架空线路（裸导线或绝缘导线）接地故障定位
工作模式：
参数测量:
线路绝缘电阻、电容测量。
指导合适的定位方法。
在线定位（线路带故障运行，低过渡电阻接地）：
无须发射机，无须登杆挂接传感器。
仅使用接收机，沿线分段查找，故障前后判据明确。
交流定位（线路故障停运，低过渡电阻接地）：
发射信号：大功率特种超低频交流信号主动注入。
接收信号：沿线分段查找，无须登杆挂接传感器。
高效工作：无须登杆，极大提高测试效率，降低工作强度。
直流定位（线路故障停运，高/低过渡电阻接地及弧光接地）：
发射信号：大功率脉动直流信号主动注入。
接收信号：沿线分段查找，需要登杆挂接传感器。
全能定位模式，尤其解决弧光接地定位难题。
直流耐压:
故障修复后的验收测试。
设备组成:
发射机：内置大容量锂离子电池组，无需外接电源，方便易用。输出高电压、大功率。
接收机：全数字化高灵敏度信号处理，判据明确直观。
交流传感器：在线空间矢量定位和交流定位使用，直接连接接收机。
直流无线传感器：直流定位使用，挂于线路，和接收机之间无线数据传输。开口钩型，无需闭合，方便线路挂接。
弧光接地适配器：定位弧光接地故障时使用，接在发射机和线路之间。
技术指标：
直流无线传感器-接收机间通信：2.4GHz，>100m。
电源：发射机480WH锂电池组；接收机18650锂电池×2。
体积：发射机450×240×270mm，接收机226×120×55mm。
质量：发射机11.5kg，接收机0.9kg。
Current & Voltage Relay Testing
PTE-100-C Secondary Injection Test Set
- Powerful but lightest Secondary Injection Tester
- 15.6kg in weight
- 250A current output
- Ingress Protection IP67
- AC 350V output
- DC 350V output
- 1 mS / 5 digits timer display
* Free Demonstration*
Power Testing
HT Marcotest MT300
Advanced Multidunction installation Tester
HT Marcotest MT300
Advanced Multidunction installation Tester
Advanced multifunction device for verification of electric safety of private and industrial electric systems
(IEC/EN61557-1)
All verifications of electric safety provided for by standards IEC/EN61557-1.
Advanced Loop Verification of magnetothermal protections, fuses and cable sizes.
Earth resistance by voltammetric method with 2 or 3 spots in TT, TN and IT systems, overall earth resistance measurement and with clamp meter T2100 (optional).
Ground resistivity.Measurement of electric parameters insingle-phase installations (V,A, W, VAR, VA, PF)
Test of RCDs type A, AC, B up to 1A, also with separate clamp jaws with test current up to 10A (with optional accessory RCDX10).
Measurement of insulation resistance.Measurement of continuity of protection conductors.
Verification of phase sequence (SEQ) and leakage currents.
Macrotest MT300 is a revolutionary device. Its TFT colour display with capacitive touch-screen allows using this device in a completely new manner. Macrotest MT300 makes available on its display all possible variables to obtain a perfect measurement; your task will only be to “touch” what you really want to measure: then simply leave the rest to Macrotest G3’s micro-processor!
The device complies with all requirements as regards the safety of electric systems: test of RCDs type A, AC also up to 1000 mA and type B; insulation, continuity, earth resistance tests (this also with the aid of the optional clamp T2100).
With the appropriate programming guided by the touch-screen system, this device can test the interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C, D, K and fuses type gG and aM! The device can be used with external feelers for measuring environmental parameters such as air temperature/humidity, illuminance (Lux) further to measuring leakage currents, cosphi, power and harmonics, Loop/Line impedance and calculating the assumed short-circuit current with high resolution (0.1mOhm) in TN systems with use of optional accessory IMP57. Cutting-edge management of measurementwith indication, at the end of each safety test, of compliance or non-compliance with requirements with simple symbols OK or NOT OK.